Email Us
POE Splitter/ Injector With Lightning Surge Protection

POE Splitter/ Injector With Lightning Surge Protection

POE Splitter with lightning protection is a kind of surge protective device, designed for preceding stage POE equipment, which is separated to be backward stage power supply and network signal transmission respectively.

POE injector with lightning protection is a kind of surge protective device, designed for POE equipment. which is used to combine preceding stage power supply and network signal to one line at the backward stage.


Features of SPD for Ethernet Power System POE-48-H POE6-48-F

  • Patented product

  • Graceful in appearance, rigorous in strictures

  • Less insert loss, fast response

  • Low residual voltage

  • Coarse and fine full protection

  • PCB board adopts the  design of micro-strip

  • Good isolation, low line interferences

Application of SPD for Ethernet Power System POE-48-H POE6-48-F

  • Wireless coverage

  • Monitoring system


Technical Parameters of SPD for Ethernet Power System POE-48-H POE6-48-F

Model

POE6-48-H

POE6-48-F

Lightning projection zone(LPZ)

2

Standards Compliance

IEC 61000, EN60950

According to IEC61643

III

According to DIN VDE6075 Part6(Draft 11.89) A1, A2

D

Max continuous operating voltage Uc

5V

Nominal discharge current (8/20µs) In

3KA

Max discharge current Imax (8/21µs) Imax

5KA

Voltage protection Level

@C2(8/20µs) Up

≤190V(L-L)≤500V(L-G)

Voltage protection Level

@C3(1kV/µs) Up

≤145V(L-L)≤600V(L-G)

Rated load current IL

200mA

Limiting Voltage(10/700µs)

≤20V

Cut-off Frequency fG

250MHz

Response time tA (L-N/N-PE)

1ns

Mounting

Be Installed between protected equipment and signal line

Adapt Transmission rate

1000Mbps

Transmission standards

100BaseT/ 1000BaseT/1000Base TX, CAT5/CAT6, POE

Dimension

105(H)×68(W)×28(L)mm

Interface form

RJ45

IP code(IEC EN 60529)

IP20

Power Part


Nominal working voltage(Un)

48V

Max continuous operationg voltage(Uc)

57V

Nominal discharge current (8/20µs) In

5KA

Max discharge current Imax (8/21µs) Imax

10KA

Load current

0.5A

Protection level Up(In)

150V

Error rate

≤10-12

Material/color

Aluminum/Blue

Standards Compliance

IEC61643-1, EN60950, GB/T18802.21-2002, TB/T2311-2002. YD/T 1235.2

Insertion loss

≤0.1dB

Working conditions

Temperature: -40 to 85℃, Relative humidity: ≤95%



Installation and Wiring diagram of POE-48-H

POE6-48-F


Related Products

Leave a Message
contact
Contact Us
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept