EN
jp 
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
ro 
bg 
nl Low insertion loss, fast response time
Low limiting voltage precise limiting voltage
Large discharge current
High transmission rate
Low bit error rate
PCB designed with micro-strip.
High isolation and slight line disturbance
Low insertion loss, fast response time
Low limiting voltage precise limiting voltage
Large discharge current
High transmission rate
Low bit error rate
PCB designed with micro-strip.
High isolation and slight line disturbance
Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common module and different module
TVS array technology, low capacitance
DC power supply is allowable
Multi-Strike Capability
Patent technology
Designed for monitor device not to be spoiled by lightning over-voltage, induced over-voltage and static discharge.
Video Camera, CCTV
E1, PDH, SDH, SPDH
Digital hard disk video cassette recorder (DVR)
Security system, Access control system, Protection for the monitoring system.
HD SDI surveillance system; Video transmission equipment;
Model | SDI-1 | SDI-2 | SDI-3 |
Lightning projection zone(LPZ) | 2 | ||
Standards Compliance | IEC61643-1, EN60950,GB/T18802.21-2002,TB/T2311-2002, YD/T1235.2 | ||
According to IEC61643 | III | ||
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 | D | ||
Max continuous operating voltage Uc | 12VDC | ||
Nominal discharge current (8/20µs) In | 3KA | ||
Max discharge current Imax (8/21µs) Imax | 5KA | ||
Transmission rate | Video:10Mbps Video:1.485Gbps/3Gbps | ||
Limiting Voltage(10/700µs)component wire-Enclosure | 40V | ||
Nominal working voltage(Un) | 12V 24V 220V | ||
Max continuous operation voltage(Uc) | 15V 30V 275V | ||
Nominal discharge current Imax(8/20µs) | 5kA | ||
Max discharge current Imax(8/20µs) | 10kA | ||
Load current | 0.5A | ||
Protection level Up ( In) | 60V 100V 900V | ||
Response time (Ta) | 1ns | ||
Mounting | Be Installed between protected equipment and signal line | ||
Working conditions | Clamped type | ||
Dimension | 90*25*25mm 118*90*45mm | ||
Interface form | BNC(J,K according to the actual needs of the configuration) Video:BNC,PTZ control Clamped type | ||
IP code(IEC EN 60529) | IP20 | ||
Error rate | ≤10-12 | ||
Material/colour | Aluminium/Blue | ||
Insertion loss | ≤.0.5dB | ||
Working conditions | Temperature: -40 to 85℃, Relative humidity: ≤95％ | ||
